Half Hull Model

half hull model

MODELS - VESSELS - HALF
Culler, Robert D.
USA, MA, Hyannis
1968
wood
overall: 8 1/4 x 29 x 4 in.

Half hull model of a Robert D. “Pete” Culler designed launch. Vessel designed for Commodore Percy Chubb, and was built by the Concordia Yacht Company in 1968. Model is unpainted, vertical pencil lines are drawn at roughly every 2 ¼ in. Name plate above the model reads “30’ x 8’ 6” O.B. - Sc: ¾” = 1’ / Mr. Chubb & Con Co., Inc. / R.D. Culler 1968”. Top edge of model worn. Half model mounted on 8 ¼ x 29 x ⅝ in. board; edges worn and scuffed. Eye hooks screwed to the top edge of the backboard for hanging. Model secured to board with two screws from back. Overall fair condition. Overall: 8 ¼ x 29 x 4 in.

2022.50